spark plug cap

[Tia813]

Received my Pamco high out put ignition today. I've put together plenty of spark plug wires but never caps. I have an idea of how it goes but i dont want to mess anything up especially the coil side. Can someone shoot me a link on how to put these caps together? Googled and came up with nothing. THanks

 

[Gordon]

They screw into the ends of the wires, like a sheet metal screw. I use a small safety pin to start the hole in the plug wire.

 

[5twins]

I trim about 1/8" of insulation off the wire and fan the strands out in a radial pattern .....

I put a little dielectric grease on the end then screw it into the coil or cap.