For Sale - Triple clamps for GSXR front-end swap (offers?)

[Ahmed Taleb]

Hi Folks,

I have a set of triple clamps and steerer that are bolt-on ready to convert your front-end to use 2000 - 2003 GSX-R 600/750 fork legs. Here's the detail:

- Cognito Moto top triple clamp, drilled for risers
- Suzuki GSX-R lower triple clamps, vapor honed to match finishes
- Custom machined XS650 steerer, pressed into the factory lowers

I was going to use this on my XS rebuild but I decided to go another direction. PM me with offers if you're interested.

 

[Zedhead]

Is that 50mm upper yoke bore and 52mm lower? Difficult to see the dimensions in the pics. I have a pair of K4 GSX-R forks that I'd like to fit to my XS, and if the sizes are right, I'm interested, despite being on the wrong side of the Pond... ;-)

 

[Ahmed Taleb]

Hey Zedhead,

These came off K0-K3 GSXR 750 forks. I found a spec table on the internet somewhere that said that they were 50mm top & 54mm bottom diameter. But, I can put my calipers on them when I get home tonight and message you the exact dimensions if that helps.

 

[Zedhead]

Fantastic, thanks, I'll check the dimensions of the forks I have tonight as well ;-)

 

[Ahmed Taleb]

Hi Zed,

I measured with calipers and they are indeed 50mm top yoke, and 54mm lower. LMK if that will work with your application.

Cheers,

 

[Zedhead]

Ooh, yes, that's the right dimensions for the forks I have! I'll PM you ;-)