Wanted - vm34 carb body

[pat_in_the_hat]

so im a huge idiot and im kicking myself really hard.
Story;
Got some nice, new and expensive vm34s. Used them a summer until one of the air screws kept unthreading itself and making the bike run lean on one cylinder. I dont know how this was happening as it has that spring pushing against it. Anyway, I grabbed some locktite and applied it to the air screw.
Turns out the locktite that i used was the permanent stuff (red kind).

So I go to slightly adjust the air screw one day and with a little bit of pressure, the two wings of the flathead part break off. And now i cant get it out. Tried drilling it out, but it just wont go.

Anyway, does anyone have an extra vm34 carb body kicking around? I dont need the bowl, jets, or anything. just the body.

 

[JesseeS]

I think I may actually have one. Let me double check to make sure it isn't a 38 though

 

[Hawkeye]

Got one. Text me 8507779680

 

[pat_in_the_hat]

still looking. and just to clarify. this is the model im looking for. and i just need the carb body.

 

[pat_in_the_hat]

bump. anyone?

 

[2eightcustoms]

take a propane torch and heat up the body by where u put the locktite it should come out pretty easy

 

[pat_in_the_hat]

^ yea, i tried that. but the end of the air screw sheered off so that it was flush with the carb. So when the locktite was hot and viscous, i had nothing to grip onto to turn it.

 

[Norman1950]

I think I might have just a body, let me check. But it won't be until tomorrow until I get to my shop.