-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Wiring Harness
- Thread starter Raven 88
- Start date
-
- Tags
- electrical
littlebill31
Smells of Raw Fuel
I got one and canabalized it for my simplified harness. Got rid of the 31 yr old wires and was able to keep the correct colors. It fit fine to my bike and has all the correct conectors, but like I said I cut it up.
Make sure you get the correct harness. They go by the first 3 characters on your VIN. Example: I have an '81 SH, so the VIN is 4M4-XXXXX. There should also be sticker on your harness with the number. I think it's near the coil.
Make sure you get the correct harness. They go by the first 3 characters on your VIN. Example: I have an '81 SH, so the VIN is 4M4-XXXXX. There should also be sticker on your harness with the number. I think it's near the coil.
The few problems I've heard about was in a couple places a couple of the wires were in the wrong places in the connectors. When Installing just make sure the wire colors match on both sides of the connectors.
