So I just did the fork seals on my XS1B and after tightening the wheel I noticed it seems to be sitting off to the drum plate side more than it should (not running directly under fender). I have to say I have had the wheel off a few times before for other reasons and when tightening things back up I tightened the pinch bolt prematurely before tightening the castle nut which can cause stress on lower fork leg I would think. This time I tightened the castle nut to spec, compressed the forks a couple times and then tightened the pinch bolt. I'm afraid the bike will dog track now that the wheel appears to be off to the left side of the bike. Looking in the manual I see no signs of a spacer or washer between the drum plate and the fork. Any xs1b owners out there ever experiance this?