79 Rear Mag Wheel Sapcer

Muggs · Oct 11, 2011

Hello All,

OK, I'm a idiot!!! :banghead:

I have somehow lost the rear wheel spacer and, as I know they're unavailable, I was wondering if someone who had theirs apart could do some measuring for me.
I need measurements for parts 4, 5, & 6 from the drawing below. A picture or three would also be nice.
I will be very grateful and you will get my undying love and affection.

TIA,
Muggs

weekendrider · Oct 11, 2011

The material and labor to turn out #6 will get very expensive.
Best bet buy an old wheel that has them, it will be cheaper.
A tip to newbsters if you are BUYING a wheel make sure those parts are included.

Muggs · Oct 11, 2011

Weekendrider,
Thanks for the heads up, but that's what I do.
If I had the #'s I could turn them up in no time; for free.

weekendrider · Oct 11, 2011

http://www.xs650.com/forum/showthread.php?t=10682&highlight=collar

In another thread I posted diamensions for the collar. But Mr.Riggs will have better
numbers and technical knowledge

Muggs · Oct 11, 2011

Weekwndrider,

Thanks, I modeled the part and I'll get it out to my CNC guy.
Is there a recess for the Bearing Spacer (part#4). If not should there be, to keep the bearing spacer from falling into the wheel before the axle is installed.

Muggs

weekendrider · Oct 11, 2011

The pressure between bearings and grease keep it in place.
To remove the bearings you have to slide it to the side.
So a recess would hamper that?

Muggs · Oct 17, 2011

Well with MANY thanks to jamesgs4, I have items 4, 5, & 6.
In the mean time, I am still having 20 or so of these things made (part #6).
They're $20.00 + S&H. Hit me with a PM if you have any interest.

Muggs

79 Rear Mag Wheel Sapcer

Muggs

XS650 Member

weekendrider

Iron Horse cowboy

Muggs

XS650 Member

weekendrider

Iron Horse cowboy

Muggs

XS650 Member

weekendrider

Iron Horse cowboy

Muggs

XS650 Member

Similar threads