dforce
XS650 Member
Selling of all my spares to help fund a new build. everything is with shipping to lower 48 add $10 for west coast. Pay pal friends/family dubbforce@gmail.com
willing to do some trading but only looking for Honda rebel 250 chrome rear shocks, stock drum brake shoes/springs and actuator arm, 19'' 36 spoke front kit for disc, 447 complete engine gasket kit. stock shift lever, rear chopper fender, fender struts and chopper tail light/ license mount
MB leather hand tooled "clown shoe" $160 brand new and bad*** just not my style
Biltwell solo 1 diamond stitch used for a short time, clean on top but has scratches underneath from springs comes with weld on hard tail mounts from lowbrow $85 for both *SOLD*
35mm XS fork shrouds rattle can black, they need repainted $110
Hippy killer cast brass peg/shift set $75 used for a week
Hippy Killer metal flake green pegs and yellowish brake pad $70 used but good condition
XS/Harley kicker tig welded, tested it works. dull finish $50 *SOLD*
650 central 1 3/4 exhaust Torque Peak Optimizers never used $35
NOS 1 3/4 chrome square mufflers no clamps, have shelf wear but never used $80
stock head pipes made into street sweepers for fun $10 *SOLD*
glass door knob for hand shift $25
feltraiger grifter gloves size XL fit more like large only tried on once. $45
1 3/4 exhaust tips biltwell ribbed aluminum *SOLD* and lowbrow brass $12.50 ea
voodoo vintage "snail cam" 20mm axle adjusters with hardware only mocked up $20
front street cycle 7/8 stainless bars with stock clamp lower and chrome upper with stainless bolts. bars are 10" tall, could use a better polish job. originally did not have any pull back but I decided to add some with heat, now there is a small ripple but hardly noticeable. rubbers are worn. $85
biltwell stash tubes one complete and one just the hardware $5 for everything *SOLD*
black 3" seat springs used $7.50 ea *SOLD*
7/8 dirtbike clutch perch and lever painted black and used $7.50
chrome ninja sai, was going to make a sweat sissy bar with it but... $35
Jegs white/tan exhaust header wrap 1''x50' with a few clamps $30 new
brass coated yamaha belt buckle with free blk leather belt, its old and the brass has flaked off in a few spots but still cool. $25
Husqvarna WR430 aluminum gas tank, chrome cap, original dirty petcock and clean inside. has a very small dent on the left and the petcock spigot has been repaired. tank is untested $125
stock right front brake caliper works newer pads and painted black, not perfect but runable, $25
stock rear caliper mount, rear master cylinder/reservoir and Mikes xs SS braided brake line $25
vintage "foot" gas pedal cover no hardware $7.50
pair of 4'' LED blk aluminum driving lights that I used on my bike went diff route, bright AF stainless hardware $30
pair of old school NOS chrome 4x7 driving lights that work but decided to "Modify mounts" still usable just would have get creative $20
1953 ambulance light it was painted white with a red bulb and flasher inside, modified to use on my first bike. It now is painted two tone metal flake brown polished the SS ring installed a new 7" sealed beam car bulb and has a neutral indicator in it. super rad light. need repainted comes with Monster craftsmen head light mount. picture shows it mounted on my current project for reference $70
Stock 18" high flange 36 spoke drum rear wheel, super rusty and crusty but rebuild-able no drum $make offer plus shipping. ill upload a photo if there is interest.
willing to do some trading but only looking for Honda rebel 250 chrome rear shocks, stock drum brake shoes/springs and actuator arm, 19'' 36 spoke front kit for disc, 447 complete engine gasket kit. stock shift lever, rear chopper fender, fender struts and chopper tail light/ license mount
MB leather hand tooled "clown shoe" $160 brand new and bad*** just not my style
Biltwell solo 1 diamond stitch used for a short time, clean on top but has scratches underneath from springs comes with weld on hard tail mounts from lowbrow $85 for both *SOLD*
35mm XS fork shrouds rattle can black, they need repainted $110
Hippy killer cast brass peg/shift set $75 used for a week
Hippy Killer metal flake green pegs and yellowish brake pad $70 used but good condition
XS/Harley kicker tig welded, tested it works. dull finish $50 *SOLD*
650 central 1 3/4 exhaust Torque Peak Optimizers never used $35
NOS 1 3/4 chrome square mufflers no clamps, have shelf wear but never used $80
stock head pipes made into street sweepers for fun $10 *SOLD*
glass door knob for hand shift $25
feltraiger grifter gloves size XL fit more like large only tried on once. $45
1 3/4 exhaust tips biltwell ribbed aluminum *SOLD* and lowbrow brass $12.50 ea
voodoo vintage "snail cam" 20mm axle adjusters with hardware only mocked up $20
front street cycle 7/8 stainless bars with stock clamp lower and chrome upper with stainless bolts. bars are 10" tall, could use a better polish job. originally did not have any pull back but I decided to add some with heat, now there is a small ripple but hardly noticeable. rubbers are worn. $85
biltwell stash tubes one complete and one just the hardware $5 for everything *SOLD*
black 3" seat springs used $7.50 ea *SOLD*
7/8 dirtbike clutch perch and lever painted black and used $7.50
chrome ninja sai, was going to make a sweat sissy bar with it but... $35
Jegs white/tan exhaust header wrap 1''x50' with a few clamps $30 new
brass coated yamaha belt buckle with free blk leather belt, its old and the brass has flaked off in a few spots but still cool. $25
Husqvarna WR430 aluminum gas tank, chrome cap, original dirty petcock and clean inside. has a very small dent on the left and the petcock spigot has been repaired. tank is untested $125
stock right front brake caliper works newer pads and painted black, not perfect but runable, $25
stock rear caliper mount, rear master cylinder/reservoir and Mikes xs SS braided brake line $25
vintage "foot" gas pedal cover no hardware $7.50
pair of 4'' LED blk aluminum driving lights that I used on my bike went diff route, bright AF stainless hardware $30
pair of old school NOS chrome 4x7 driving lights that work but decided to "Modify mounts" still usable just would have get creative $20
1953 ambulance light it was painted white with a red bulb and flasher inside, modified to use on my first bike. It now is painted two tone metal flake brown polished the SS ring installed a new 7" sealed beam car bulb and has a neutral indicator in it. super rad light. need repainted comes with Monster craftsmen head light mount. picture shows it mounted on my current project for reference $70
Stock 18" high flange 36 spoke drum rear wheel, super rusty and crusty but rebuild-able no drum $make offer plus shipping. ill upload a photo if there is interest.
Attachments
Last edited: