I done my marking and aware of the different angle and lenght of the laces, however reading all these topics I’m a little confused which is related to inner and outer. So dousing all the inners first both side - which appear to be the way to go, however is inner referred to the spokes inserted from the hub center or to the spokes laying on the inner layer ?
On attached photos the once inserted from the hub side circled in red but they lay on the outside while the blue circled are inserted from outside but lay on the inside. To save myself the agony of insert half the spokes and realize I did it opposite of what’s right figure I would ask here. Haven’t laced a wheel with this spoke pattern before.
Thanks in advance.
On attached photos the once inserted from the hub side circled in red but they lay on the outside while the blue circled are inserted from outside but lay on the inside. To save myself the agony of insert half the spokes and realize I did it opposite of what’s right figure I would ask here. Haven’t laced a wheel with this spoke pattern before.
Thanks in advance.