71XS1B Carbs Screws04 Apply firm downward pressure while carefully unscrewing the broken screw.
71XS1B Carbs Seals03 Throttle shaft seal removed from its seat.
71XS1B Carbs Seals02 Use the washer as a fulcrum while levering the opposite bottom end of the seal. The washer keeps the screwdriver from reseating
71XS1B Carbs Seals01 Removal of throttle shaft seals is easier if done with a small screwdriver and flat washer. Thin the screwdriver blade as neces
71XS1B Carbs Screws04 Apply firm downward pressure while carefully unscrewing the broken screw.
71XS1B Carbs Screws03 A high-quality/hardened, T6 torx screwdriver bit, with its slightly tapered profile and sharp splines, is an excellent easy-out
71XS1B Carbs Screws02 Drill a 1/16" (0.062", 1.5mm) hole, centered in the broken screw.
71XS1B Carbs Screws01 The inevitable broken throttle plate screw. This must be removed, without damaging the throttle shaft or butterfly valve.
TwoManyXS1Bs

71XS1B Carbs Screws04 Apply firm downward pressure while carefully unscrewing the broken screw.

There are no comments to display.

Media information

Album
1971 XS1B BS38 carburetor rebuild
Added by
TwoManyXS1Bs
Date added
View count
737
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top