71XS1B Carbs Seals06 Adapter rings allow use of regular throttle shaft seals 11.5 x 12 x 3
71XS1B Carburetor Bowl Screws Stripped thread renewed with #8-36 threads.
71XS1B Carburetor Bowl Screws01 Original M4 x 0.7 threads.
71XS1B Carburetor Bowl Screws Stock screws are M4 x 0.7 - 12mm A #8-36 screw is about 0.007" larger in diameter and has nearly the same thread pitch
71XS1B Carbs Seals06 Adapter rings allow use of regular throttle shaft seals 11.5 x 12 x 3
MikesXS Throttle Screws Modified. Countersink face recut from 80° to 92°. Shortened from 8mm to 6.5mm. Ends center drilled to 1.2mm, for staking
71 BS38 ThrBush06 Bushing part number. Either 8H 1A, or 8K 1A. 10mm OD, 8mm ID, 8mm long.
71 BS38 ThrBush05 Manufacturer logo on bushing wall.
TwoManyXS1Bs

71XS1B Carbs Seals06 Adapter rings allow use of regular throttle shaft seals 11.5 x 12 x 3

There are no comments to display.

Media information

Album
1971 XS1B BS38 carburetor rebuild
Added by
TwoManyXS1Bs
Date added
View count
904
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top