71XS1B Carbs Throttle Bushing 01 Steel bushing, appears to be split-type. Only on throttle lever side. Other side is 8mm hole in carb Zamak body.
WarpedBase02 Airfilter side Straightedge reveals gap
WarpedBase01 Viewed from the side, the curve of the carb base that fits to the carb bowl can be seen.
71XS1B Carbs Throttle Bushing 02 Same split bushing, different lighting.
71XS1B Carbs Throttle Bushing 01 Steel bushing, appears to be split-type. Only on throttle lever side. Other side is 8mm hole in carb Zamak body.
71XS1B Carbs Slide Springs Part number and length.
71XS1B Carbs Slides 02 The diaphragms were sealed with spray Plasti-dip on bottom. A few years exposure to gasohol and carb cleaner bubbled the seal
71XS1B Carbs Slides 01 Diaphragms are original, old, cracks forming around lips. But they have no leaks.
TwoManyXS1Bs

71XS1B Carbs Throttle Bushing 01 Steel bushing, appears to be split-type. Only on throttle lever side. Other side is 8mm hole in carb Zamak body.

There are no comments to display.

Media information

Album
1971 XS1B BS38 carburetor rebuild
Added by
TwoManyXS1Bs
Date added
View count
823
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top