Blanking plug remembered! Also remember to line up marks on the bearings (little slashes on the side of the bearings) to make installing the crank cor
Cleaned & ready!
Took a little extra time to pre-clean the surfaces, before the HondaBond!
Cleaned mating surfaces, on both sides! Then applied the HondaBond!
Blanking plug remembered! Also remember to line up marks on the bearings (little slashes on the side of the bearings) to make installing the crank cor
Top view, showing the rephase work, supplied by Hugh. One of the best experiences, in this rebuild!
Lil' extra goob on the bearing seals, before closing 'em up!
Smeer'd the HondaBond with my finger, across all the mating surfaces. I moved the dowel pins, to the other side of the crankcase, for an even, uninter
YAM277

Blanking plug remembered! Also remember to line up marks on the bearings (little slashes on the side of the bearings) to make installing the crank cor

There are no comments to display.

Media information

Album
Just In Case
Added by
YAM277
Date added
View count
589
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top