The upside down build, before the crank was installed. Notice dowel pins are installed on this side, to make sealing the other case half easier.
The upside down build, before the crank was installed. Notice dowel pins are installed on this side, to make sealing the other case half easier.
Here's the lil' bugger! Don't Forget!!!
I show the blanking plug, next to the hole it will be installed into, before sealing and closing the cases.
The elusive "blanking plug"!
The part of the case, that will be coated with HondaBond and placed on top. Remember, this is an upside down build! Sorta like living in an opposite w
Remember the guides
5th gear overdrive, supplied by Mike's Xs. BE FORWARNED!!! You will have to have a machine shop open the inside diameter of the gear, to match the ori
YAM277

The upside down build, before the crank was installed. Notice dowel pins are installed on this side, to make sealing the other case half easier.

There are no comments to display.

Media information

Album
Just In Case
Added by
YAM277
Date added
View count
577
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top