Media added by YAM277

Navigation

  1. XS650 Originals and Restorations 175
  2. XS650 Choppers 31
  3. XS650 Bobbers 126
  4. XS650 Trackers 163
  5. XS650 Cafe Racers 102
  6. XS650 Slightly Modified 139
Browse albums

Media comments

  • P
    Spoiler
    where can I get this spoiler
  • Tony Harrell
    CLASS ACT 06
    Couldn't remember your name after first seeing your work , but finally found you and got it bookmarked ! Love all your builds!

Most media items

  1. YAM277
    510

    YAM277

  2. TwoManyXS1Bs
    502

    TwoManyXS1Bs

  3. I am Carbon
    500

    I am Carbon

  4. Mike G
    466

    Mike G

  5. Mailman
    463

    Mailman

Media statistics

Categories
6
Albums
2,942
Uploaded media
25,464
Embedded media
18
Comments
1,626
Disk usage
4.6 GB
IMG 34- Steel spacers, install with the wider side up, against the steel plate.

IMG 34- Steel spacers, install with the wider side up, against the steel plate.

  • 0
  • 0
IMG_2552

IMG_2552

  • 0
  • 0
IMG 33- Install 3 of the new springs, in the primary drive gear.

IMG 33- Install 3 of the new springs, in the primary drive gear.

  • 0
  • 0
IMG_2553

IMG_2553

  • 0
  • 0
IMG 32- Primary Drive Gear, flipped over to show spring placement.

IMG 32- Primary Drive Gear, flipped over to show spring placement.

  • 0
  • 0
IMG_2554

IMG_2554

  • 0
  • 0
IMG 31- Install 3 of the springs in the steel plate, the smaller spaces, before attaching to Primary Drive Gear.

IMG 31- Install 3 of the springs in the steel plate, the smaller spaces, before attaching to Primary Drive Gear.

  • 0
  • 0
IMG_2555

IMG_2555

  • 0
  • 0
IMG 30- Carefully pocket springs on their flat side surfaces.

IMG 30- Carefully pocket springs on their flat side surfaces.

  • 0
  • 0
IMG_2556

IMG_2556

  • 0
  • 0
IMG 29- Make sure spring is all the way in the pocket, with flat side of spring compressed against both sides.

IMG 29- Make sure spring is all the way in the pocket, with flat side of spring compressed against both sides.

  • 0
  • 0
IMG_2557

IMG_2557

  • 0
  • 0
IMG 28- Don't install springs next to each other, like this photo. Just install 3 springs into the smaller spaces, every other opening.

IMG 28- Don't install springs next to each other, like this photo. Just install 3 springs into the smaller spaces, every other opening.

  • 0
  • 0
IMG_2558

IMG_2558

  • 0
  • 0
IMG 27- Using a pair of Channellocks, the springs really have to be compressed to fit properly. The flat sides of the springs need to fully pocket int

IMG 27- Using a pair of Channellocks, the springs really have to be compressed to fit properly. The flat sides of the springs need to fully pocket int

  • 0
  • 0
IMG_2559

IMG_2559

  • 0
  • 0
IMG 26- Wrong way to install springs, must be every other smaller opening.

IMG 26- Wrong way to install springs, must be every other smaller opening.

  • 0
  • 0
IMG_2560

IMG_2560

  • 0
  • 0
Yamaha XS650

Yamaha XS650

  • 0
  • 0
IMG 25- All the new cush springs are the same size, however. . . .all the openings are not! 3 openings in this steel plate are smaller and these are t

IMG 25- All the new cush springs are the same size, however. . . .all the openings are not! 3 openings in this steel plate are smaller and these are t

  • 0
  • 0
IMG_2561

IMG_2561

  • 0
  • 0
xs650 white

xs650 white

  • 0
  • 0
IMG 24- Picture of Steel plate on top of Primary Drive Gear and Clutch Housing, looking from the back.

IMG 24- Picture of Steel plate on top of Primary Drive Gear and Clutch Housing, looking from the back.

  • 0
  • 0
IMG_2562

IMG_2562

  • 0
  • 0
Back
Top