Recent content by Diff3RentBreed

  1. Diff3RentBreed

    Back at it Again With the Wiring Problems

    Thanks! I'll definitely have to do that while fixing this problem. I thought it could have been that but I wasn't sure. The brake light didn't come on when I right away. In fact, it took two broken LEDs and this is the third one that I have put into it and it's on now. I also had to install a...
  2. Diff3RentBreed

    Back at it Again With the Wiring Problems

    Will do. Thank you.
  3. Diff3RentBreed

    Back at it Again With the Wiring Problems

    I took a gander in it today and did notice the same color wires as the ones in the chart so at least the guy who had it before me didn't mess anything up too bad. I'm just going to have to study the wiring chart and see if I can get these wires all wired up correctly in the headlight unit. Now I...
  4. Diff3RentBreed

    Back at it Again With the Wiring Problems

    I don't even know how to explain this one. The problem is with indicator lights on the control box if you would call it that. Lights just aren't lighting properly. The video describes this fully. Any ideas on what to try? I'm kind of at a loss here. 1977 XS650. Thanks!
  5. Diff3RentBreed

    LED Turn Signal Issues

    It is true. I just wanted a brighter light for when I'm riding at night. I wanted to make sure people could see my brake light. All this started when my break light broke. It was at that moment I decided to change all the lights to leds. Had I known the hassle, I would have just gotten a regular...
  6. Diff3RentBreed

    LED Turn Signal Issues

    First post edited with fix write up.
  7. Diff3RentBreed

    LED Turn Signal Issues

    I got it. I don't know what voodoo magic you did but I wired them incorrectly again and they all work. They actually all work on the first flasher I got. Both led flashers I have work.
  8. Diff3RentBreed

    LED Turn Signal Issues

    Yes and yes When I take the leds that are working in the rear out and put them in the front, they do not work. When I take both leds out of the rear and put them in the front, they don't work. Only the rear signals ever work. I don't see how I'm wiring them incorrectly. I have both positive...
  9. Diff3RentBreed

    LED Turn Signal Issues

    Okay so this is the one I bought: https://www.superbrightleds.com/moreinfo/flashers-load-resistors/lf1-s-flat-universal-motorcycle-electronic-flasher/787/ I just installed it and I am having the same problem. The back leds work just fine but the front ones won't even turn on.
  10. Diff3RentBreed

    LED Turn Signal Issues

    You da best. Thank you! I will get on this now.
  11. Diff3RentBreed

    HID vs LEDS Headlight Question

    Well I didn't know that. I definitely don't want to blind people. That would not help me to not to get hit. I'm still in the early stages of my HID searching. I have not seen the actually lighting of it physically. Do you know of any HID housings that would fit in the bike? I would assume...
  12. Diff3RentBreed

    LED Turn Signal Issues

    Okay. Do you recommend the flat or the pin? Since none of those are just plug and play with the bike, would it matter which one I actually get?
  13. Diff3RentBreed

    HID vs LEDS Headlight Question

    I am looking to upgrade my current headlight on my stock 1977 XS650. Nothing has been done to the bike except for fixing it up and getting it to stock running order. I have a few questions. I am looking for the brightest / most visible light possible since I do a lot of riding at night. First...
  14. Diff3RentBreed

    LED Turn Signal Issues

    I have tried searching for this problem but it seems like no one else has had my problem, figures. Here's a twister for you, I tried wiring up some new LEDs on my 1977 XS650 with half luck. Yes, you heard me. Half luck. I can only get the back two LEDs to flash, not the fronts. I purchased...
  15. Diff3RentBreed

    1977 Vacuum Intake

    Boy have I been a busy guy these past few days. Thank you so much for the images. I didn't know what you were talking about until I saw those. I thought they were the ports above those bigger ones because they looked more capped off on mine. So thank you again!
Back
Top