Recent content by Lusodub

Don't know how but bike is running fine now... only played with the wires connection (coil and spark plugs ends)....

Another question? What would be the symptoms of a bad choke plunger or seal? Thx

Thx for the answer! Throttle seals are changed! Will do the choke plunger. The diaphragms seem to work (passed slide test) even if they are in bad shape... I think i will still change them.. Im running out of options.. Thx

Hi, Can the Pamco e-advancer be causing random misfires? My bike has a sligh uneven idle problem..idles at 900rpm and at 1100 rpm randomly. On acceleration, the bike randomly misfires... And therefore The bike is impossible to run correctly. The first 100 meters the bike runs well...

Ahaha no worries !

so funny..

Hi everyone, What are the symptoms of a bad slide diaphragms? Does it affect bike at idle ? Regards,

Hi, Could the car diaphragm be causing me this rough idle/coughing? Thx

Hi, I just let it idle with the choke on longer... I just cleaned the carbs at least two times... Because I was suspecting something blocking the pilot passageway Still not working ...

Hi, I have a problem with my bike Spitting/coughing through carb ... Here is my status: -Pma/pamco setup -timing done -cam chain adjustment done -carb sync done -carbs are cleaned folowing guide. -battery fully charged -floats verified and needle cleaned -throttle seals changed...

Yes! I did it last summer..

Hi, Here is some updates: Idle is still unstable/ seems like its puffing air outside the air intake of carbs... Timing is fine Cam chain is fine Battery fully charged:no changes Battery full charged with Pma out : no changes Sprayed everywhere to find air leaks without success... Even near...

Hi Gary and Pete, I never did change the throttle seals. Sprayed carb cleaner to find air leaks without success. I will definitely change them. As for the battery, it was fully charged. But i will try it on load without the PMA connected as you suggested. Thx for the feedbacks...

Great, thx! Will try all of the above...

Hi, My idle is not stable\running rough... Can an electrical problem be an issue? -The carbs just got cleaned out. (Jet, mixture screw, pilot, float height adjusted ....) -No air leaks on carb holders... -Petcock is fine... -XS air filters are clean.... -Cam chain was adjusted last...