Search results

80 xs650 had top end rebuilt over winter as well as the whole bike was built over winter new pma/pamco new battery and regulator just need to get the carbs jetted properly but I should have that done in a few days asking $3000 obo email for more info alykbs@gmail.com

So here's a video of what I'm dealing with the carbs are freshly cleaned and still dealing with the dim headlight issue

So bike has new battery and regulator. New pma and pamco So bike rode awesome for About 2 blocks to the gas station. Went to start and nothing. Checked a few things while I was waiting and the headlight wouldn't come on Got the bike started headlight was hardly working and got about a...

So new battery and regulator installed bike will idle but when given gas it just dies out Headlight and tail light used to come on strong if bike wasn't on now you can hardly see them on I'm stumped Has pma/pamco kick only and headlight tail light Anyone have any clue anything works

So last week out for a ride the bike died on me blew the headlight and the battery was fried. So looking around on here and reading it seemed it was my regulator? So ordered a new one and a new battery hooked up the new regulator and new battery perfect lights are working again bike is sounding...

Where to start. Motor was rebuild over the winter frame was hard tailed with a kit from tc bros 6 over forks 21 front wheel 18 rear bike was built over the winter all I bought was the motor and front half of frame $4800 email if you have questions or want to see more pics Alykbs@gmail.com

Was wondering if anyone has ever had a problem with the mikes regulator that comes in the pma/pamco kit? Think mine is bad and the reason it fried my new battery

So out riding Friday night and my bike starts to miss and fire real bad for a couple miles and the headlight seemed like it wanted to just die out. The closer I got to home it wasn't missing anymore but the light was still dieing out so threat ended my ride So today I check things out...

Finally got the bike started sort of I have to keep on the gas or it just dies out. Cam chain,valves are to spec timing is close so I noticed the left pipe getting real hot quick and changing color. So I pulled the plugs the right was fine but left was black. Just not sure of this issue bs38...

So after all the adjusting to the cam and being off about a tooth that problem is solved. So it will now start but I have to stay on the gas for it to stay running. I did this for about 15 seconds and noticed the left exhaust pipe started to darken real quick so inlet off the gas and it dies...

When first trying to start my bike a few days ago I didn't have a ground on the coil and I finally noticed after about 10 minuets of kicking the coil was smoking and the plastic on the ends bubbled up would this cause the bike not to start again? I still get a spark but not sure if its good enough

So finally got all the wiring done everything is working time to try and start. Nothing won't start I've got the cam chain adjusted right the valves are good it's got spark and fuel is getting to the carbs. I have the mikesxs pma and pamco kit and its not timed yet would that cause it from not...

Wondering why this is leaking like crazy from all of the wholes in this pic not sure why first time dealing with these thanks.

New at wiring never done it. So it's all wired up by the wiring diagram that I used but as soon as I connect everything to the battery the headlight and taillight come on even with the toggle switch in the off position. So I ran a separate on for the headlight it now turns on and off but the...

So I'm going to be wiring soon and I'm just going over my stuff and my headlight and tail lights I bought where from lowbrow. So as I'm looking I notice the the headlight only has 2 wires white and black my question is would the white wire be running light and black be the ground? And second...

So I have a 79 xs650 that about to be built back up and I no nothing about wiring. I'm only gonna be running headlight,taillightand a toggle switch for my on-off no electric start kick only I have a new pamco kit and pma and running a 4 cell anti gravity battery. So I was just wondering if...

My 650 that started from just the front end of the frame and motor

my build as of now looking to be done in the next month or so

been good so far ready to get it all welded up soon and painted

looking for a xs650 neck and title any help is awesome as well thanks email me if you have one or info about one alykbs@gmail.com