Search results

Thanks for all the advice! I ended up ordering a new one from Mikes. I don't have the time lately or don't want to make time to fashion one. Thanks!

Would you recommend re-using stock connectors or just eliminating them?

I kinda saw things going this way from what I've read. I just thought it'd be easier to spend the $90 and eliminate some things instead of buying however many different wire colors in what at least a 10-20' length unless I can go somewhere that has enough colors individually by foot.

That's what I had in mind, just was wondering if any one had a year recommendation for my pamco w/ elec. start setup. I was planning on a mid 70's one and going from there. Yeah, my original harness is nasty too.

I have a 650g or 80' with a pamco ignition that ran with electric start working fine, but didn't charge, I just decided to do away with the old harness since I'm not liking the headlight relay crap. I don't want to use the speedo, blinkers, and obviously won't be using the factory ignition...

I put a pamco ignition in my bike, disconnected the TCI and only hooked up the red/white wire to the coil and not the orange. For one my headlight doesn't work unless I jump from the blue/yellow on the lighting relay, and the charging system isn't working, or is my starter anymore (possibly...

http://www.xs650.com/forum/showthread.php?t=7513 This was a great post I found diagnosing electrical problems, when I tested my coil I came up with 1.9 ohms, which says it calls for 2.5 +/- 10%, and when I went cap to cap is was like 33.5k, which is far off 23k...coil just might of decided to...

I read a post about tricking the lighting delay and the headlight does come on when I run a jumper wire from the positive on the battery to the blue/yellow wire on the light delay box (gray box behind battery), so that problem is sorted out. The TCI pickup is plugged in, everything is plugged...

Hey guys first time poster! I have a 1980 xs650G I bought that had a bad cylinder. I removed the engine, replaced the bad piston and then painted the engine, and reinstalled it. Now I have no spark. I had spark prior to taking the bike apart. I really didn't tamper with the wiring other...