boyer

  1. C

    Boyer micro digital

    Hey guys, So I have a Boyer micro digital(photo below) on the 79 I’m builiding. It was a running bike until my mate crashed it 4 years ago. The problem I have is I don’t have the advance unit and don’t know if I need it. I haven’t taken it off my self (but I know some bits got borrowed for...
  2. DanielBlack

    Stella - 1977D survivor, back on the road.

    I've been having a great time over the last two weeks as I become further acquainted with my 77D, mostly stock, Stella. After the first basic safety checks and oil change, etc. I put her quickly into her role as my daily ride. Most days are 5-10mi, but the last week has given me a few longer...
  3. Fndirtygreaser

    Add me to list of accell coil users with boyer ignition

    Well I have looked everywhere for information regarding accell 3 ohm coil and boyer ignitions. It's very limited. I believe only a handful of guys are running this particular coil with electronic ignition. Some back story ... I got the bike with boyer ignition already installed. After...
  4. poorman9

    Questions about spark plug caps and wires with Boyer iginition

    I have a 81 650H running a boyer blue box (Micro-Digital Ignition System - kit 00103), I bought this bike with the blue box, so I'm back tracking a bit here. The terminal between my spark plug wire and the Gill ignition coil has broken off (see photo below). Where can i order new copper...
  5. smokenjoep01

    Trouble shooting Boyer ignition

    My precious XS has failed to start. I havent rode it in about a month. It has been parked in my garage hooked to the battery Tender. Ran fine when parked! I have 12.8 volts at the coil, but no spark. 13.2 at the battery. Anyone know of trouble shooting procedures for the Boyer Branson...
  6. I

    ? - what ignitions are out there? -

    XS650 Ignition Possibilities Standard Points…Cam ignition pick-up Single lobe cam, twin points system…original Double lobe cam, single points system…to optimise power supply you really need to use a dual output coil with a primary winding resistance of about 4-5 ohms These are easy...
Back
Top