RFLIVES
Resident Sidecar nut
The tax man's a commin $5,500 obo
Hate to let it go but something has to. Needs nothing but a beard and a flannel shirt.
http://www.xs650chopper.com/2015/01/sportchop/
Engine- 650cc
– Top- end rebuilt
– New Athena gasket kit
– New cam chain guide
– Valves / seats cut at machine shop
– Bead blasted head / Powder coated jug
– All covers powder coated
– Hugh’s handbuilt pma alternator and regulator
– Pamco electronic ignition
– Dual out-put coil with performance wires and NGK boots and plugs
– Anti-gravity battery installed where starter was
– All new wiring harness with modern mini blade fuses
– Rebuilt / ultra-sonically cleaned carbs with all new brass and uni-filters
– Kick only
– Brand new 17/33 gears and DID rivet style chain
– Pandemonium ya-mama pipes powder coated with hi-temp and wrapped
– Runs great with no issues 1-2 kick bike
– 400 miles on re-build
Chassis
– Voodoo vintage mk21 hardtail professionally installed by Monster craftsman
– Cantilever solo seat with biltwel slim line seat and fox vanilla shock
– 2005 GSXR 600 Front suspension conversion
o New seals and fluid
o Tapered roller neck bearings / new wheel bearings front and rear
o Cognito Moto Upper tree custom made for this bike
o Speed-moto clip on’s off a Ducati
o Tokico 4 pot caliper
o Stainless steel brake line
o New slim line brake caliper
– Stock wheels powder coated with new spokes installed
– Brand new Pirelli Sport demon tires and tubes
– Hand rolled 16 gauge rear fender
– Alien tank with fuel gauge
– Twin petcocks with filters
– Bates style headlight
– Entire bike is powder coated with the exception of the frame.
– Frame is coated in KBS Coatings Black top epoxy paint
– Mid’s with biltwel folding foot pegs
– Koso digital dash driven off of rear wheel
– Magura throttle
– 650 Central ez pull clutch cable with yzf clutch
Hate to let it go but something has to. Needs nothing but a beard and a flannel shirt.
http://www.xs650chopper.com/2015/01/sportchop/
Engine- 650cc
– Top- end rebuilt
– New Athena gasket kit
– New cam chain guide
– Valves / seats cut at machine shop
– Bead blasted head / Powder coated jug
– All covers powder coated
– Hugh’s handbuilt pma alternator and regulator
– Pamco electronic ignition
– Dual out-put coil with performance wires and NGK boots and plugs
– Anti-gravity battery installed where starter was
– All new wiring harness with modern mini blade fuses
– Rebuilt / ultra-sonically cleaned carbs with all new brass and uni-filters
– Kick only
– Brand new 17/33 gears and DID rivet style chain
– Pandemonium ya-mama pipes powder coated with hi-temp and wrapped
– Runs great with no issues 1-2 kick bike
– 400 miles on re-build
Chassis
– Voodoo vintage mk21 hardtail professionally installed by Monster craftsman
– Cantilever solo seat with biltwel slim line seat and fox vanilla shock
– 2005 GSXR 600 Front suspension conversion
o New seals and fluid
o Tapered roller neck bearings / new wheel bearings front and rear
o Cognito Moto Upper tree custom made for this bike
o Speed-moto clip on’s off a Ducati
o Tokico 4 pot caliper
o Stainless steel brake line
o New slim line brake caliper
– Stock wheels powder coated with new spokes installed
– Brand new Pirelli Sport demon tires and tubes
– Hand rolled 16 gauge rear fender
– Alien tank with fuel gauge
– Twin petcocks with filters
– Bates style headlight
– Entire bike is powder coated with the exception of the frame.
– Frame is coated in KBS Coatings Black top epoxy paint
– Mid’s with biltwel folding foot pegs
– Koso digital dash driven off of rear wheel
– Magura throttle
– 650 Central ez pull clutch cable with yzf clutch
