dblwlf
XS650 Addict
*****EDIT!@@@@@******
This stuff is now being parted out. If you don't like a price, make an offer. Combine shipping on multiple items. I want this stuff gone to make room for another bike, can't pick that up til all this is sold. If you see something in the picture that isn't on this list, pm me. Or if you are looking for something you don't see, pm me. Ive got boxes of crap.
Engine: $1800
- Torn down by me and a friend who is an ex stock car mechanic. Cleaned throughly.
- Rephased crank and cam by HHB
- PMA by HHB
- Pamco 277 ignition kit w/coils
- All new gaskets on everything
- NEW clutch/springs/hardware
- New oil delivery tube
- New sump and oil filters (with one extra new of each)
- New hardware
- new .75 pistons from mikes, bored locally by griffs machine(race dudes)
- sparx capacitor
- couple sets of new spark plugs
$500 w/ filters or $550 w/filters and manifolds - Carbs:
- 34 mm Lectrons bought from HHB
- tc bros intake manifold kit
- k&n filters(in box, new)
$500 obo - Frame:
- Titled in my name
- TC bros hardtail, welds done by a shop but are not all too great, safe but could use some tlc
- gas tank bungs are tacked on
Front end stuff:
SOLD- 2 sets of trees, one is powder coated
SOLD- 2 sets of tapered neck bearings/cups
SOLD - 2 sets of hhb risers(one set has center hole bored for 1/2 hardware)
$200 - NICE set of completely shaved/polished lower tubes
SOLD- 1 set of tubes lowered with HHB spacers 2"
SOLD- new seals, clips, caps, dust seals etc
Bars/controls:
SOLD - hhb master cylinder
SOLD- pit clutch with hhb hydraulic kit
$12- random tracker bar
$75- set of front street M-bars(fit on top of trees)
PENDING - set of t-style bars i made myself
SOLD- biltwell kung fu grips
SOLD- biltwell whiskey throttle
$35 - new speedo from mikes
wheels:
$75 - 2 19" aluminum xs rims(one powder coated black), 1 18" alum. xs rim
$150- 1 rear drum mag wheel(super clean tire is decent)
$65- 21" and 18" DID set(these rule)
18/19SOLD 21" = $50 - 18,19,21" stainless spoke sets from mikes
- 2 rim strips
$50 each- 2 front hubs and 1 nice rear hub all cleaned well, one front and rear has new bearings and new seals
SOLD-hhb speedo delete
tanks:
$115 -low tunnel wassell replica, black cap
$50 - mid tunnel tiny ass hill climber wassell style, black gas cap
misc. parts:
SOLD- HHb speedster pipes raw
SOLD - jumpstreet customs mid controls(seriously nice)
$40 - cam chain riveting tool
$65 - valve reseating kit, tubes of paste
$10 - xs650 manual
$50 - throttle addiction bezel headlight
$65 -biltwell tail light/ plate holder
This stuff is now being parted out. If you don't like a price, make an offer. Combine shipping on multiple items. I want this stuff gone to make room for another bike, can't pick that up til all this is sold. If you see something in the picture that isn't on this list, pm me. Or if you are looking for something you don't see, pm me. Ive got boxes of crap.
Engine: $1800
- Torn down by me and a friend who is an ex stock car mechanic. Cleaned throughly.
- Rephased crank and cam by HHB
- PMA by HHB
- Pamco 277 ignition kit w/coils
- All new gaskets on everything
- NEW clutch/springs/hardware
- New oil delivery tube
- New sump and oil filters (with one extra new of each)
- New hardware
- new .75 pistons from mikes, bored locally by griffs machine(race dudes)
- sparx capacitor
- couple sets of new spark plugs
$500 w/ filters or $550 w/filters and manifolds - Carbs:
- 34 mm Lectrons bought from HHB
- tc bros intake manifold kit
- k&n filters(in box, new)
$500 obo - Frame:
- Titled in my name
- TC bros hardtail, welds done by a shop but are not all too great, safe but could use some tlc
- gas tank bungs are tacked on
Front end stuff:
SOLD- 2 sets of trees, one is powder coated
SOLD- 2 sets of tapered neck bearings/cups
SOLD - 2 sets of hhb risers(one set has center hole bored for 1/2 hardware)
$200 - NICE set of completely shaved/polished lower tubes
SOLD- 1 set of tubes lowered with HHB spacers 2"
SOLD- new seals, clips, caps, dust seals etc
Bars/controls:
SOLD - hhb master cylinder
SOLD- pit clutch with hhb hydraulic kit
$12- random tracker bar
$75- set of front street M-bars(fit on top of trees)
PENDING - set of t-style bars i made myself
SOLD- biltwell kung fu grips
SOLD- biltwell whiskey throttle
$35 - new speedo from mikes
wheels:
$75 - 2 19" aluminum xs rims(one powder coated black), 1 18" alum. xs rim
$150- 1 rear drum mag wheel(super clean tire is decent)
$65- 21" and 18" DID set(these rule)
18/19SOLD 21" = $50 - 18,19,21" stainless spoke sets from mikes
- 2 rim strips
$50 each- 2 front hubs and 1 nice rear hub all cleaned well, one front and rear has new bearings and new seals
SOLD-hhb speedo delete
tanks:
$115 -low tunnel wassell replica, black cap
$50 - mid tunnel tiny ass hill climber wassell style, black gas cap
misc. parts:
SOLD- HHb speedster pipes raw
SOLD - jumpstreet customs mid controls(seriously nice)
$40 - cam chain riveting tool
$65 - valve reseating kit, tubes of paste
$10 - xs650 manual
$50 - throttle addiction bezel headlight
$65 -biltwell tail light/ plate holder
Attachments
-
IMG_1085.jpg304.3 KB · Views: 221
-
IMG_1086.jpg306.5 KB · Views: 209
-
IMG_1087.jpg240.7 KB · Views: 257
-
photo 1.jpg101.5 KB · Views: 245
-
photo 2.JPG133.2 KB · Views: 220
-
photo 3.JPG139.4 KB · Views: 214
-
photo 4.JPG105.9 KB · Views: 234
-
photo 9.jpg117.4 KB · Views: 243
-
photo 8.JPG139.4 KB · Views: 225
-
photo 7.JPG122.8 KB · Views: 218
-
photo 6.jpg109 KB · Views: 232
-
photo 5.JPG286.5 KB · Views: 236
Last edited: