For Sale - 82 XS650 heritage special engine part out plus extra goodies

[bradical]

Hey I have a storage unit full of xs parts that I need gone asap. Super cheap for these parts so if you need anything at all just ask. Im moving in a month and dont want to move this stuff. All prices are plus shipping. If you have an offer let me know I would like this stuff gone. Thanks, Brad


** valves, cyclinders, head, rocker cover, cam end caps, valves all sold
2 Starters - 15.00 ea
2 Charging systems - 15.00 ea.
Set of valves(both intake and both exhaust with springs and retainers) - 25.00 *SOLD*
Dipstick with a couple marks on it - 5.00
Cam end covers with screws - 10.00 *SOLD*
Advance rod - 15.00
Cam chain tensioner guide with cam chain - 10.00
Cylinders need bored - 25.00 *SOLD*
Cylinder head no valves - 25.00 *SOLD*
Rocker cover with rockers - 25.00 *SOLD*
Complete cam chain tensioner - 15.00
Complete shift shaft with detent - 15.00
Right side handlebar switch needs cleaned - 15.00

 

[ippytattoo]

Are the charging systems in good working order? Do you have the advance mechanism?

 

[bradical]

One of the charging systems was off of a running engine but has sat for a year or so now. I dont think that makes a difference just want it to be known. All I have is an advance rod but no mechanism.

 

[bobadame]

I'll take the cylinders, the head and the valves if they are useable, and the cam end covers. Do you have the valve covers? I'm at zip code 80521. Please let me know the total including shipping. Thanks. I guess I'll need rocker covers too.

 

[bradical]

I do have a full set of of valve covers that I scuffed and clear coated to give the brushed aluminum look. I would like to see 25.00 for the set and I can throw them in the box to save on shipping. Let me know and Ill get an entire quote together. Thanks, Brad

 

[bobadame]

I'll pass on the valve covers. Thanks anyway.

 

[bobadame]

Payment sent. Thank you.

 

[glennpd]

Are either of the charging systems for an 80+ model with timing magnet?

 

[bradical]

One is from a 76 and the other is from an 82 not sure which uears had the pickup on the charging coil.

 

[pablohoney]

I'll Take the advance rod if you still have it. Is it in good condition? Not worn? Thanks

 

[bradical]

It is good condition with minimal wear.

 

[Al Stone]

Got a cam chain tension-er with all the parts still ? I would be interested in that please get back to me, here is my e=mail alstonemusic@aol.com THANKS Al

 

[Furious D]

I,ll take one of the charging systems if you still have it. Sent you a PM