flthead
XS650 Addict
have a regulator for my banshee swap ... it has 2 red wires ,2 green wires and 1 black wires ...what wires need to go to batt + and what one to neg - i'm assuming the others would be extras that can be discarded
-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
another banshee reg. question
- Thread starter flthead
- Start date
-
- Tags
- electrical
mrriggs
XS650 Junkie
The two green wires are ground.
The two red are the positive output.
The black is a voltage sensing wire. It originally hooked to the ignition switch to get power when the switch is turned on. But, you can also just hook it to the two red wires to keep it simple.
The two red are the positive output.
The black is a voltage sensing wire. It originally hooked to the ignition switch to get power when the switch is turned on. But, you can also just hook it to the two red wires to keep it simple.
Similar threads
