littlebill31
Smells of Raw Fuel
todd~http://www.xs650.com/forum/showthread.php?t=4170&highlight=nylon+screws
You can, but there are some things you need to do first.
You can, but there are some things you need to do first.
-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Battery and Rec Qs
- Thread starter Tia813
- Start date
-
- Tags
- electrical
sorry my computer crashed so i couldn't reply.
yes i am doing the pm magnet/kick only. i should have looked first but the rec i bought from punkskalar (hugh) has 18awg wires. so what i plan on doing is 14awg before the box then after i'll use 16awg. as far as the battery I'll cut the wire as close as possible then solder in 14awg wire. thanks everyone for the input. learned a lot
yes i am doing the pm magnet/kick only. i should have looked first but the rec i bought from punkskalar (hugh) has 18awg wires. so what i plan on doing is 14awg before the box then after i'll use 16awg. as far as the battery I'll cut the wire as close as possible then solder in 14awg wire. thanks everyone for the input. learned a lot
