I've been trying to get the bike going all afternoon, no luck: Cleaned the plugs, cleaned the points, set the gap, timed it, pulled the carbs off, went through them, nope, no dice. So, did it all again, no dice, even sitting down and scratching my head didn't work, just wouldn't start,couldn't even get it to cough.
I just happened to shine a torch down the plug hole, and be damned the bloody workshop gremlins have been at it again: They left all my 10mm sockets and spanners where they were, but when I wasn't looking they stuffed big wads of paper into the inlet tracts. Managed to get all the torn bits out of the left cylinder with a pair of tweezers, the wad in the right cylinder was still intact, blocking the right cylinder.
I just happened to shine a torch down the plug hole, and be damned the bloody workshop gremlins have been at it again: They left all my 10mm sockets and spanners where they were, but when I wasn't looking they stuffed big wads of paper into the inlet tracts. Managed to get all the torn bits out of the left cylinder with a pair of tweezers, the wad in the right cylinder was still intact, blocking the right cylinder.