So here is my 75 XS650B, Nothing Chopped, I have all the original parts I pulled to save or sell. I had motor bored out to 1.0 over, New pistons, Athena Gasket Set, UNI Foam Filters, and as soon as they're back in stock JBM carb boots. I have my Pamco and new dual coil from Mikes XS. Ballistic 8 Cell Battery on the way, and a new flasher relay for the LED lights pictured. Also I have the stock foot pegs replaced with the old rugged Bear trap style. I cut my tractor seat down to a good fit (its shown in an old picture). New grips, 12" shorty mufflers on the way as well as black exhaust wrap, 'super bike' bars, Currently I'm prepping the motor and painting it part by part with VHT black metallic and VHT clear, Black plasti Dipped Fenders and Forks, Top half getting fork gaiters. Next up re-assembly.I'm leaving the area behind the seat raw and open, but putting a pad on the fender.
I welcome ideas on some side covers, I also would like to lower the back end down but keep the stock shocks, any ideas? I hope to finish by Christmas.
I welcome ideas on some side covers, I also would like to lower the back end down but keep the stock shocks, any ideas? I hope to finish by Christmas.