alfredo
1978 xs650 Special
Too bad you are so far away. Would be rad to ride around. Good job so far and keep it up! 
-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Curtis P
XS650 Addict
Thanks,
The new TIG shows up tomorrow so I will be dabbling with more stainless welding. And it will be ready when i strip the frame right down and cut the original gussets out and tig my own new ones in
The new TIG shows up tomorrow so I will be dabbling with more stainless welding. And it will be ready when i strip the frame right down and cut the original gussets out and tig my own new ones in
Curtis P
XS650 Addict
Which one of these should I get?
Electronic Ignition Kit by Pamco, a proven reliable electronic trigger system that replaces the stock XS650 breaker point type ignition. Works with original advance assembly parts and is an easy set & forget install. Fits: All 1970 1970-84 XS650's. Kit Includes: Basic trigger assembly (XS#14-0900) Ultimate hi output XS performance Ignition Coil (#17-6903), XS Performance Yellow Silicone Copper core Plug Wire set (#23-2906) and Two 5K NGK spark Plug Caps (XS#23-3113).
http://www.xs650direct.com/parts/img250/14-0911.jpg
Pamco Ultimate High Output - (1970-72 650's) Kit Contains: 2pc. NGK BPR8EIX Iridium Spark Plugs, Pamco Electronic Trigger Plate and rotor, 82Kv Cool run Ignition Coil, Ignition coil mount bolts and standoffâs, XS Performance copper core Silicone Wires and 2pc. NGK Spark Plug Caps.
http://www.xs650direct.com/parts/img250/14-0917.jpg
I will also be going wit a PMA later on towards the end of the season or start of next, I just want a 'set and forget' ignition for this season.
Electronic Ignition Kit by Pamco, a proven reliable electronic trigger system that replaces the stock XS650 breaker point type ignition. Works with original advance assembly parts and is an easy set & forget install. Fits: All 1970 1970-84 XS650's. Kit Includes: Basic trigger assembly (XS#14-0900) Ultimate hi output XS performance Ignition Coil (#17-6903), XS Performance Yellow Silicone Copper core Plug Wire set (#23-2906) and Two 5K NGK spark Plug Caps (XS#23-3113).
http://www.xs650direct.com/parts/img250/14-0911.jpg
Pamco Ultimate High Output - (1970-72 650's) Kit Contains: 2pc. NGK BPR8EIX Iridium Spark Plugs, Pamco Electronic Trigger Plate and rotor, 82Kv Cool run Ignition Coil, Ignition coil mount bolts and standoffâs, XS Performance copper core Silicone Wires and 2pc. NGK Spark Plug Caps.
http://www.xs650direct.com/parts/img250/14-0917.jpg
I will also be going wit a PMA later on towards the end of the season or start of next, I just want a 'set and forget' ignition for this season.
itrguy
XS650 Addict
get the ultimate high output..
Curtis P
XS650 Addict
Other then the.obvious hotter spark. Is there any other benefit?
