Caliper Piston stuck and aint moving!!!!

[triniriderz]

Right ok my next little issue is (drum roll) a stuck Piston in the front caliper ..

Normally I would just pump it out before caliper removal but the line was split and no Dot4 was present ..

I dont have a compressor at the moment so is there any other way of getting this piston out?? I have done the normal things like 3 in 1 oil etc etc etc but aint moving..

I remember some time ago someone saying you could use two bolts and something somthing and you can pull it out sound familiar?? if so what is this procedure?

 

[pamcopete]

triniriderz,

You can use a grease gun on the bleeder valve. Plug the hose connection with a bolt. If the bleeder valve won't work with your grease gun, replace it with a grease fitting.

 

[CDNTX650]

yup, got mine out with a grease nipple and grease gun

 

[royxxx]

grease is good but messy, take it to the servo use their airline, I've got a timber wedge, 2" wide, a foot long & tapering from 1 1/2" to 1/4", pump a bit, move the wedge, pump some more.