rude
XS650 Addict
I've read everything I can in this forum regarding adjusting the clutch and for all intents the clutch "feels" good, I can see the worm turn but the clutch still won't disengage. For adjustment I wound the screw out then in until it started touching the push rod (resistance) and backed it off a spoofteenth and then final adjust at the handlebar.
Checked the cable and it is seated. I have tried rolling in gear with clutch in, also hit the starter in gear with the clutch held in, (kickstarter is not an option at present due to rearsets and a mate tacking a long time to do the bends required to miss the brake lever)
Since I last used the clutch 6 months ago I have sourced a new cable and re ran it up and between the carbs, and obviously I have fiddled with the adjustment
So before pulling the right sidecover to see if the plates are stuck together tonight I thought I'd consult with you guys.
Am I on the right track or is there something else I am missing?
Your help is appreciated
Checked the cable and it is seated. I have tried rolling in gear with clutch in, also hit the starter in gear with the clutch held in, (kickstarter is not an option at present due to rearsets and a mate tacking a long time to do the bends required to miss the brake lever)
Since I last used the clutch 6 months ago I have sourced a new cable and re ran it up and between the carbs, and obviously I have fiddled with the adjustment
So before pulling the right sidecover to see if the plates are stuck together tonight I thought I'd consult with you guys.
Am I on the right track or is there something else I am missing?
Your help is appreciated