I had hoped to find this in the TECH section, but I failed to find it. I'm getting ready to put a bottom end together and I wish to gather all the copper washers for this bike in one order.
I found M8 with a 12.4 mm outside diameter to go under the six crown nuts on the bottom.
I need:
The four for the left case cover. 90430-06014-00
All of those required for the oil feed tube unions. 90430-10171-00 and 90430-14043-00
Two that go under the holder for the front cam chain guide. 90430-11033-00
I already have those for the top of the engine. My hope is that someone already recorded these, and I simply failed to find it.
I'm attempting to but this whole mess from McMaster-Carr.
I found M8 with a 12.4 mm outside diameter to go under the six crown nuts on the bottom.
I need:
The four for the left case cover. 90430-06014-00
All of those required for the oil feed tube unions. 90430-10171-00 and 90430-14043-00
Two that go under the holder for the front cam chain guide. 90430-11033-00
I already have those for the top of the engine. My hope is that someone already recorded these, and I simply failed to find it.
I'm attempting to but this whole mess from McMaster-Carr.