Wanted - Extended drum brake rod

[TheBooger]

I have a stock brake rod for a rear drum. wondering if anyone has one that is extended 4 inches. I would trade for my stock length or buy it cash. I just need the rod itself as I have all other Parts

 

[member3480]

Do you know how long you need and do you know that you can go to your local hardware store and buy the rod and just have to bend it and thread it. Maybe you will have $20.00 bucks in parts and thread die. But let me know I got a bunch hanging around.

 

[TheBooger]

I knew that but I thought it might be easier to see if anyone had an extra. I need 4 inches longer than stock. I'll measure my stock one today and let you know

 

[member3480]

Did you figure out how long I got two long ones

 

[TheBooger]

I need the rod itself about 24 inches including the threaded portion. plus or minus an inch or so would work as well. let me know what you have and what you want for it shipped to 84105

 

[member3480]

OK won't be back at garage until SAT but I may have one

 

[hard_y_rd]

What do you have there DGC for length on those rods. I may want one. May just weld a piece in mine

 

[member3480]

Sorry took so long been crazy here. This is what I got picture below.
The longest is 21"

 

[TheBooger]

No worries. I think I'll just get started on making one. do you know off hand what size die I need to use the stock nut?

 

[member3480]

I use 10mm and works with stock wing nut

 

[mrkil]

I posted a diy on how to make your own from a stock one on my blog.

http://mrkil.blogspot.ca/2011/10/this-is-quick-diy-for-those-with-longer.html?m=1

 

[TheBooger]

I posted a diy on how to make your own from a stock one on my blog.

http://mrkil.blogspot.ca/2011/10/this-is-quick-diy-for-those-with-longer.html?m=1

Thanks for the link mrkil