sivarTi
XS650 Enthusiast
Obviously a 1980 XS650. I know as I make the list I'm forgetting a ton of things. I'm asking 2800.00
900 Miles on the following.
Front and Rear Tires
Mikes XS Headers
Mufflers
Sump Filter
Side Filter
Battery
Pods
Complete Canadian jet Kit and new mixture screws and O rings
All Fuses cut out and replaced with new holders
Hand made battery tray
Regulator and Rectifier (Charging is Great)
Sylvania Silver Star headlight
Rebel Rear Shocks
200 Miles on:
Front and Rear Pads
Front Piston
Front MC Rebuild Kit
I'm forgetting some things.
New In Box:
Front Gator Boots for Forks
Fork Seal
Front Stainless Brake Lin
Complete Eng Gasket Kit
Misc Brass Washers for Banjo fitting etc
New jets to lean it out
TC Bros rear swing arm bushings
Timing Chain Tensioner
The Bike runs hard and sounds very good. I bought the gasket kit mainly because I bougth the tensioner so it seemed like a good idea to cover any issues that may come up.
Tank is brand new paint 3 weeks old no gas in tank since done. New set of Bars is pictured on the bike, obviously the controls are hanging there. Seat is new to me and needs to have the brackets made for it. I have a front fender that is pretty nice but don't run it. I have a ton of other parts sitting here for it, some good some bad some ugly but all seem worth while to hold onto.
Bike show with black tank and another seat I have for it and upside down clubman bars.
Bike also show with new bars, seat and tank.
900 Miles on the following.
Front and Rear Tires
Mikes XS Headers
Mufflers
Sump Filter
Side Filter
Battery
Pods
Complete Canadian jet Kit and new mixture screws and O rings
All Fuses cut out and replaced with new holders
Hand made battery tray
Regulator and Rectifier (Charging is Great)
Sylvania Silver Star headlight
Rebel Rear Shocks
200 Miles on:
Front and Rear Pads
Front Piston
Front MC Rebuild Kit
I'm forgetting some things.
New In Box:
Front Gator Boots for Forks
Fork Seal
Front Stainless Brake Lin
Complete Eng Gasket Kit
Misc Brass Washers for Banjo fitting etc
New jets to lean it out
TC Bros rear swing arm bushings
Timing Chain Tensioner
The Bike runs hard and sounds very good. I bought the gasket kit mainly because I bougth the tensioner so it seemed like a good idea to cover any issues that may come up.
Tank is brand new paint 3 weeks old no gas in tank since done. New set of Bars is pictured on the bike, obviously the controls are hanging there. Seat is new to me and needs to have the brackets made for it. I have a front fender that is pretty nice but don't run it. I have a ton of other parts sitting here for it, some good some bad some ugly but all seem worth while to hold onto.
Bike show with black tank and another seat I have for it and upside down clubman bars.
Bike also show with new bars, seat and tank.
Last edited: