Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
I know i don't have points. Could you describe a pamco set up? I could pm you my number if its easier to describe with minimal confusion? I am very new to these motors
I know i don't have points. Could you describe a pamco set up? I could pm you my number if its easier to describe with minimal confusion? I am very new to these motors
Well, then you have the factory TCI which fires both spark plugs at the same time from the same coil so it is very unusual to only have spark on one cylinder. How did you determine that you only had spark on one cylinder?
Well, then you have the factory TCI which fires both spark plugs at the same time from the same coil so it is very unusual to only have spark on one cylinder. How did you determine that you only had spark on one cylinder?
I have spark in both cylinders. Compression is 125psi each, all valves work properly. I've swithcthed the plugs and plug wires to the opposite sides and it's always the same outcome dead right side running left.. If I put fuel directly into the motor on the right side it still won't fire.. It starts to pop the right side about 4000-5000rpm then it back fires like crazy.