Shipper
XS650 Addict
New MC, new connection box, new callipers (taken apart and seals double checked) - and still having some trouble with the callipers releasing completely. Its a single disc front on a '75xs 650. The pads are contacting the rotor but the rotor will definitely still turn - not completely freely. Brakes applied the rotor is static as per normal. Brakes released rotor will turn again but pads are still in contact.
Have read all of previous threads (I think) - have tied lever back overnight and release slowly in morning, have bled all banjo screws and connections (multiple times), have bled through the bleed screw (multiple times). Still get slight bubble release in MC when I pull lever and then let it snap back. Slight bubbles when pulling lever again.
Any more advice other than continuing the dilemma?
Have read all of previous threads (I think) - have tied lever back overnight and release slowly in morning, have bled all banjo screws and connections (multiple times), have bled through the bleed screw (multiple times). Still get slight bubble release in MC when I pull lever and then let it snap back. Slight bubbles when pulling lever again.
Any more advice other than continuing the dilemma?