So I have rebuilt my xs and it's almost complete. I put the headlight on and all of the wiring back in. Before I disconnected anything I carefully labeled each wire with it's corresponding connector. I put everything back together and noticed a couple of things. So on the ignition switch there are 3 positions. The 1st position is obviously off, the 2nd is for your lights to come but you can't start the bike. In this position the lights work. The 3rd position you are able to start the bike (mine is kick start). But my headlight doesn't work and the fuse keeps blowing. I put a bigger fuse in just to hear her start up and she does. So can anyone lead me in the right direction for the wiring. I'm not the greatest at electrical. I'm assuming it's the wiring for the lights, bad connection, not seeded in correctly, or possible wrong connection. Any help would be appreciated!