Gas cap bung

[FrkyMnky]

Bought a brass cap off Ebay and was hoping to get in touch with Monstercraftsman to get a bung for it but no luck. Anyways, I am hoping someone is willing to machine me a bung for the cap. Im 90% sure its 2" female straight thread, but ill be happy to send it so the bung can be matched. I tried looking for diesel tank filler but no luck finding those in steel.

 

[Ranger]

If you find a source for these fillers, let me know. Ryder Fleet has a shit ton of cool looking brass or aluminum gas caps, but finding filler necks is a trick.

 

[RatyXS]

So you need a part that will go into the opening of the tank so that you can use the cap you bought ??

 

[DIRTY DOG]

Bought a brass cap off Ebay and was hoping to get in touch with Monstercraftsman to get a bung for it but no luck. Anyways, I am hoping someone is willing to machine me a bung for the cap. Im 90% sure its 2" female straight thread, but ill be happy to send it so the bung can be matched. I tried looking for diesel tank filler but no luck finding those in steel.

try coyte gear here is there address I don't know how to post links yet. http://www.coyote-gear.com/fillerscaps.html
thay have good prices and ship fast hope this helps hay it worked!! lol haha

 

[FrkyMnky]

Im likely going to have a local machine shop make one, but I am expecting that to be kinda expensive. Honestly if its more than $35 its cheaper to simply order the whole kit from Monstercraftsman and hope its the right size. Then I can maybe sell the cap and use the bung

Here is the link to the cap I purchased.
http://www.ebay.com/itm/37065254316...69&_trkparms=ga1m=T34&ga2m=T0&ga3m=T1&ga4m=T5

Forgot to add, thanks for the link dirty. They don't make any steel bungs for that type of gas cap, and I don't have a TIG…

 

[MNXS650]

Have a battery operated sawzall? Know where theres some big CAT machinery? Bring the cap to be sure it works. Then you get a steel bung(maybe their Aluminum?) you can weld and you know it'll work!

 

[DIRTY DOG]

Im likely going to have a local machine shop make one, but I am expecting that to be kinda expensive. Honestly if its more than $35 its cheaper to simply order the whole kit from Monstercraftsman and hope its the right size. Then I can maybe sell the cap and use the bung

Here is the link to the cap I purchased.
http://www.ebay.com/itm/37065254316...69&_trkparms=ga1m=T34&ga2m=T0&ga3m=T1&ga4m=T5

Forgot to add, thanks for the link dirty. They don't make any steel bungs for that type of gas cap, and I don't have a TIG...

sorry about that, you can mig weld it to the tank,just so you know that cap isn't vented
so you'll have to vent it or the tank.

 

[FrkyMnky]

If you find a source for these fillers, let me know. Ryder Fleet has a shit ton of cool looking brass or aluminum gas caps, but finding filler necks is a trick.

Looks like these guys are a good source. I got a hold of monster as well and they will sell me the bung.

https://socalsac.com/gas-caps/2-14-bung
http://www.tanksinc.com/index.cfm/p...category_id=62/home_id=62/mode=prod/prd87.htm

 

[Ranger]

Thanks, I found these guys, and am going to order some filler necks from them. They have a 2 inch tall neck that's the right thread for like $12. Not sure about shipping yet, but I'm going to order 4 or 5 necks for upcoming projects I have planned.

http://www.fueltankaccessories.com/#!contact/component_14113

Alot of the diesel tank caps at this next link should work with their necks. And you can get vented and non-vented.

http://www.ryderfleetproducts.com/fuel-caps-non-locking-c-8326?pageNumber=1&sort=MRP_1769a&itemsPerPage=80