gas cap

[tadd442]

I recently aquired a "sporty style" (not actual HD) tank that has a gas fill that I've never seen before. It's flush with the surface, slightly smaller in diameter than the HD screw in gas cap threads, and is recessed about an inch before the threads begin. Any suggestions on where to find a cap?

 

[Samuraiace]

You have any pics?

 

[tadd442]

also, it's more like 5/8" deep before the threads begin.....

 

[AussieHard]

Sounds like a push release flush mounted cap.

 

[tadd442]

Sounds like a push release flush mounted cap.

Unfortunately, I think you're correct.

 

[AussieHard]

This tank has a flush mount cap

 

[jamesgs4]

also, it's more like 5/8" deep before the threads begin.....

mine is like that, opening is about 1 13/16".

cap is a twist style spinner, pinhole vented and sealed with an o-ring.

 

[jamesgs4]

found a source

http://www.debrix.com/Spinner-Gas-Cap-Harley-p/80025-m1.htm

 

[AussieHard]

Moon made those caps originally & have started production again

 

[tadd442]

This is starting to look better!....thanks guys!

 

[XSLeo]

I think that tank uses any cap that fit 82-early 96 screw in caps.