MikeC23
XS650 Addict
Yesterday I was rolling down the road when the RPMs on my bike started to climb a little higher than usual. At stop signs and such, when I had the clutch in, they went up to and stayed around 5000 RPMs. After a bit of investigation, I discovered that the little lever that the throttle cable connects to on the carb was not returning all the way against the set screw. I could reach down and manually push it against the screw, but it would not stay there on its own. I haven't had the carbs off of the bike since I built it and it was running perfectly up until this point. Any ideas what I can do or what I can check?