Wanted - Iso decent set of used carb boots for my 1980 g with bs38s

[XS Garth]

My carb boots (holders) are pretty rough looking for a good used set shipped to poulsbo wa .

 

[DB90]

I might have some

 

[itschrisb]

I also may have a set I’ll check tonight

 

[XS Garth]

I also may have a set I’ll check tonight

Ok previous reply he didn't have any

 

[nj1639]

Post a pic of your carbs.
'80 should have come stock with bs34's......unless they've been changed.

 

[XS Garth]

Post a pic of your carbs.
'80 should have come stock with bs34's......unless they've been changed.

They have been changed to bs38 that's why I put it in the listing

 

[YamadudeXS650C]

My carb boots (holders) are pretty rough looking for a good used set shipped to poulsbo wa .

The carb holders tend to crack on the exterior surface long before they crack all the way through. That is, look for cracks on the inside before tossing them out.


.

 

[XS Garth]

Yeah this happened

 

[DB90]

The carb holders tend to crack on the exterior surface long before they crack all the way through. That is, look for cracks on the inside before tossing them out.


.

@XS Garth If this is the case then mine are good. No cracks all the way through

 

[Jan_P]

Well with chemicals / glue and sealing cements these can be serviced .. At least for a while
If I recall right they are Pricey

 

[DB90]

Well with chemicals / glue and sealing cements these can be serviced .. At least for a while
If I recall right they are Pricey

I had good luck on a dirt intake boot using plasti dip haha

 

[YamadudeXS650C]

Yes, reinserting the port using an RTV or other flexible sealant seems to be a viable option.



.