pablohoney
XS650 Addict
- Messages
- 151
- Reaction score
- 0
- Points
- 16
I rebuilt the engine because it had low compression and I finally got it back together and running. I replaced the cam chain, rings, gaskets/seals and clutch plates. Couple of things though. It starts up pretty fast, but it only seems to be running on the left cylinder. I pulled the right plug lead and no change in rpms, and when I pull the left side it dies completely. I used a timing light and both sides are firing. But when I rev it up and pull the right side lead it coughs. Also both plugs are fouled. There is also a pinging in the top end. Your thoughts? Thanks