This bike seems to be getting some really premium parts, you keep calling this build , your last tracker, are you pulling out all the stops on this one?
That is one beautiful build. What seat/tail is that in your earlier posts?Out in the garage today where I roughed in this battery box. Still needs detailed (everything does).
View attachment 211765View attachment 211766View attachment 211767
Got a email from Wes at Counter Balance cycles. My seat is done and on it`s way to me. If this doesn`t provide the inspiration to finish this Turd nothing will.
View attachment 212072
Really nice piece to put your bum on!Got a email from Wes at Counter Balance cycles. My seat is done and on it`s way to me. If this doesn`t provide the inspiration to finish this Turd nothing will.
View attachment 212072
The swingarm brace on this build started as a dual shock brace. I decided to go with a monoshock after the swingarm was braced or I wouldn`t have braced the bottom on this one. Drawback on this brace is it can`t be used with a center stand. It is 1"OD .095 wall tubing. The left side short middle tube has a bend in it for chain clearance. Right side middle tube is straight. This brace was for 320mm shock length when using the stock type dual shocks. Tomorrow I`ll measure it.If you don't mind me asking what are the specs/dimensions you used for that swingarm brace? I'm looking to add one to my build
Careful.... the word 'bender' has a different connotation in Blighty. Insert the word 'pipe' before bender!I will say again you are good with that bender.
So does "Pipe".Careful.... the word 'bender' has a different connotation in Blighty. Insert the word 'pipe' before bender!
As in layin' pipe?So does "Pipe".
The main hoop for the brace is 14" total length, 10" in width (outside to outside of tubing). and the 2 tubes running down at the front are 51/2". If the hoop is made too long it will hit the center bar of the frame. If your making one yourself tack it together and test fit it with the maximum shock length. Google Joe Wiseguy swing arm brace and you`ll see some other simpler ones.If you don't mind me asking what are the specs/dimensions you used for that swingarm brace? I'm looking to add one to my build