Manfg/Model # of clutch slave inside case?

[pago cruiser]

Have been thru about 20 threads, but I cannot find the one with the clutch slave that is mounted inside the case cover?
Looks almost stock, instead of with various shaped appendages glommed onto the outside.
Can anybody point me to it?
Thanks in advance.

 

[weekendrider]

Search mrriggs hydraulic clutch? He made his own and plumbed everything in the side cover.

Found it.

 

[pago cruiser]

Wow. That is impressive. Great detail. Almost enough to take to my machinist friend and duplicate. Everything except for the piston size, and a size or manfg/model number of the hydraulic o-ring. I may have to join that site to I can post a couple questions.

But not the thread I remember.

IIRC, it was a discussion on a couple different exterior slaves, with a comment, almost an afterthought, about how it could also be mounted on the inside; and there was a pic.

Anybody else?

 

[TwoManyXS1Bs]

Could try a forum search on: "hydraulic", posted by member: "Ippytattoo"...

 

[pago cruiser]

Found that one.
Also glommed onto the outside of the cover.
This (see below) is kind of what I am looking for (from the post by weekendrider), but a little more off-the-shelf, if possible.
Failing that, if I can figure out a couple more bits of critical info, I may just make one.

']

[/URL]

 

[weekendrider]

Heiden tuning still has an exterior hose but not the fasteners?
http://www.xs650.biz/p/28/3609/mo74-cg|22=2/#ht-6599-hydraulic-clutch-kit