Need Pamco coil dimensions

[smokenjoep01]

I am about ready to convert my Boyer over to the Pamco. ( due to the fact that the blue ignitor box is out of stock at Mikes XS and it cost less for a complete ignition than just the ignitor box for the Boyer) It looks like I will need the kit with a coil (Mikes XS#14-0901) as my Boyer coil looks to be a .6 ohm and a 2.2-3.0 ohm is required for the Pamco. My dilema is I have my coils mounted in a custom location and need to confirm I can mount the Pamco coil in the current location without to much trouble. Anyone able to give me some dimensions of the Pamco standard coil? Any other things to consider/needed when swaping over?

 

[650Skull]

I have Mikes 17-6822 coil and that is roughly 4 1/2 in long and 2in wide and 2in high. The plug leads exit at the end of the coil

 

[xxxWALLYxxx]

nothing about the coil but has some1 some info on the parts used on a pamco ignition.
im trying to build one myself.i already got the hall effect sensor.

 

[pamcopete]

smoken...,

Check out www.yamahaxs650.com for installation instructions for the coils that includes pictures of the coil installed.