ok!ok! I'll read the damn instructions!

[15cherries]

Bike not running right. I cleaned the carbs and re-assembled. Right side fine, left side has a miss. I spent the day riding and adjusting my mixture screws but Right side fine and left side no matter where I put the screw no change??? I read the tech pages carb section ( all of it this time) and lo and behold at the bottom it says if adjusting the screw does not change anything your pilot circuit is most likely plugged, so carbs off again and after studying the drawing I cleaned my carbs properly and re-assembled, miss is gone adjustments work as they should and many thanks to the wise members for creating this forum and sharing their knowledge, Sam.

 

[RonXS]

It's nice to see a post with a 'its fixed' resolution...Thanks

 

[lakeview]

Thanks for updating the forum. Your success will inspire others to think and research rather than throw money at a problem.