sid693
XS650 Enthusiast
I have been messing with my bike for a little bit. Originally I was thinking the bike was running too lean and finally got around to checking the coil after 5twins gave me a plethora of information. The bike has strong hesitation around 3/4 to full throttle as of there is a revolutionary limiter. I read out the coils the other day after I found out I had a pamco with pma. I am got the bike as is and has ran fine for some time. Info on the bike. It's a 79 running 30 pilots. Needle at 3rd notch 140 mains. My coil is reading 5.1 to 5.3 ohm and when I first hook up the leads it trickles down from around 6 or 7. I read infinity as expected between terminal and lead and terminal and post. I read 25000 between plug wires. I am thinking my coil cropped out and could be the reason for my hesitation. Is there anything else I should check out before jumping to this conclusion