Pamco E-advance info for the accidental idiot!

[jd750ace]

If you happen to remove the cover from the E-advance unit (because you are a curious dumbass) and lose track of orientation, have a look at this pic. The left side of the unit in this pic is the side that goes to the coil.

FYI. Some of us are just too curious for our own good! Thanks Pete!

http://www.yamahaxs650.com/First.JPG

 

[Brian902]

Your are not alone!

 

[jd750ace]

Pete said I wasn't the first! Thought I'd put the info out in public and save him a few PMs and e-mails!

 

[TwoManyXS1Bs]

Good info, JD. Yeah, that makes sense, the wires coming off the large driver transistor go to the coil, the signal lines coming off the I.C. go to the Pamco sensor...

 

[jd750ace]

If you say so! I just asked Pete! Got wiring to do this evening.

 

[BrookieDC]

Ditto... ;-)

Glad this was already posted.

 

[1974jh5]

Yeah, I got curious and took the cover off mine just to have a peek and was really careful not to mix stuff up. I figured wiring it backwards would let Pete's special smoke out. Tell you what, it made all the difference in how my bike runs!