Pamco Wire & Engine Heat

[SantaFeTrailer]

I don't see information on this in the install instructions. Can I do this?

 

[XSLeo]

I don't see why not. The stock points wires ran that way.
Did your bike have points before? You can pull the outer cover off the points wires and run the Pamco wires through it. This will provide extra protection for the wires. I did on my 75.
Leo

 

[cycleranger]

I ran the Pamco wires exactly the same on my CJ360T. No issues so far.

 

[weekendrider]

+1 on the same way. I didn't cut any extra wire, it was run through the top motor mount and doubled then zip tied to take up slack.

It has been a couple of years since since I've used an IR thermometer to get a head temp but as recently as 1 week ago it ran routed the same with oil temps of 260-270.

 

[5twins]

I've been running my Pamco for years like that, no problems. I did add some protection farther up the wire, mimicking how the original points wire was set up .....

 

[SantaFeTrailer]

Excellent then, I knew you all would allow me to sleep at night