Pedal kicker

[Boozoongas]

Any one selling a converted brass knuckle pedal kicker?
Can’t find anyone who makes them.
Thanks

 

[hovel]

Dig deeper, look harder, Google "custom motorcycle kick start pedal". I found this in less than a minute:
https://www.fabkevin.com/shop/parts/transmission-group/brass-knuckle-kicker-pedals/
Kinda pricey but might give you some ideas.

 

[Boozoongas]

Dig deeper, look harder, Google "custom motorcycle kick start pedal". I found this in less than a minute:
https://www.fabkevin.com/shop/parts/transmission-group/brass-knuckle-kicker-pedals/
Kinda pricey but might give you some ideas.

Thanks
I see ones by Harley
These don’t fit Yamaha

 

[hovel]

Nor will you find one to fit a 1953 Zundapp KS 601. If you have few fabrication skills, hook up with someone who does. Trade the job for a case of beer. I wrote, "but might give you some ideas". Get an old POS Yamaha kickstart lever and try to marry it with something LIKE this
https://www.ebay.com/itm/Bare-Kick-...-Chopper-Custom-Knuckle-Busters-/133611272986
If you are not successful, no heartburn because the lever wasn't much to begin with and you can sell the knuckles to a friend. If you are successful, get a better lever and repeat the process. No way in the world would I modify the good lever on your bike. put it on a shelf.

 

[Boozoongas]

Appreciate the advice
Thanks ✌

 

[willis]

That link that Hovel provided is a good contact. FabKevin has been around quite a while and does very nice work. I have bought several of his parts years back when I was into the chopper seen. Might want to contact him as he can fab about anything.