Pls help- Two measurements!!

[Jossw]

Hey Guys,

I really need two measurements for where my final drive should be. I have no engine yet and my frame is in pieces. I am trying to build a new swingarm (the frame was a wrecked hardtail) so it has been cut off and I just need these two measurements.

Please help me out, THANKS!!!!!

 

[XSLeo]

On my 82 the center of the shaft is 6.25 inches up from the top of the lower frame tube. From the center of the shaft back to the front of the frame is 4.5 inches. From the center of the shaft back to the front of the swingarm is 6 inches.
You might ask one of the people that cut the frame off if they still have the cut of parts. Here and at some of the chopper/bobber forums. If they have the parts off the stock frame it might be easier to weld it back on than make all new.

 

[Jossw]

Thanks heaps XSLeo! Very much appreciated. If you ever need a bracket or whatever drawn up in Autocad for laser cutting/water jet cutting or whatever let me know!

 

[XSLeo]

I keep that offer in mind. Never know just how handy that might be.
Leo