Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Went to open the gas cap today and the key will not turn. Just trying to get some help on how to get the cap off. Key goes in but will not turn. Thanks for any help.
Went to open the gas cap today and the key will not turn. Just trying to get some help on how to get the cap off. Key goes in but will not turn. Thanks for any help.
....................... hi have you tried flooding the lock mechanism with rp7 which will remove all the junk in the lock set up,,, and wash it out as well,,,,or you could try a .020" thous feeler gauge and it will be strong enough to slip aroung the inside edges and the tank and spring the lock that way regards oldbiker
+1 you have to push the cap down firmly then turn the key. If not just that use a bit of wiggle and rock action on the key. If that doesn't get it, latch can be released from under the cap with a homemade tool better that and dissect the lock than break off a key and still have to pick the latch. A new cap seal is almost always a good idea.